Tag: science and technology

Categories
Archive Development Challenges, South-South Solutions Newsletters

African Botanicals to be used to Boost Fight against Parasites

By David South, Development Challenges, South-South Solutions

SOUTH-SOUTH CASE STUDY

More than 1 billion people in the developing world currently suffer from tropical diseases, which leave a trail of disfigurement, disability and even death. Yet only 16 out of 1,393 – 0.01 percent – of new medicines marketed between 1975 and 1999 targeted tropical diseases (International Journal of Public Health).

A combination of poverty and lack of political will means disease-ridden countries do not invest enough in research and development to find new medical remedies to save lives.

A pioneering project hopes to turn to the continent’s plants to dig up new remedies to tackle the many diseases borne by parasites.

It seeks to boost prosperity in Africa while taking on the many diseases that harm and kill people and hold back economic progress on the continent. If successful, it will make disease-fighting part of the future prosperity of African science – and boost the woefully neglected field of tropical medicine.

What is at stake is the future of Africa, as the continent has the lowest life expectancies in the world. With just 15 percent of the world’s population, Africa carries a high disease burden, for example it has 60 percent of the global HIV/AIDS-infected population. Access to clean water is poor, with only 58 percent of people living in sub-Saharan Africa having access to safe water supplies (WHO). This leaves people exposed to water-borne parasites like Schistosoma (http://en.wikipedia.org/wiki/Schistosoma), which infects hundreds of millions and is the most crucial parasitic disease to tackle after malaria.

Africa’s biggest killers in order of severity are HIV/AIDS, diarrhoeal diseases, tuberculosis, malaria, childhood diseases, sexually transmitted diseases, meningitis, tropical diseases, Hepatitis B and C, Japanese encephalitis, intestinal nematode and leprosy.

Health resources are not being proportionately allocated: only 10 percent of financing for global health research is allocated to problems that affect 90 percent of the world’s population. This has been called the 10/90 gap (http://www.globalforumhealth.org/About/10-90-gap).

“The untapped potential of African innovation capacity is enormous,” explains Dr. Éliane Ubalijoro, an adjunct professor of practice for public and private sector partnerships at Canada’s McGill University Institute for the Study of International Development (ISID) (http://www.mcgill.ca/isid). Her research interests focus on innovation in global health and sustainable development.

“Using African biodiversity to produce solutions to local (and global) problems will provide a generous return on investment in an area of the world that is destined for growth.”

Ubalijoro was recently awarded, along with Professor Timothy Geary, director of McGill’s Institute of Parasitology, a Grand Challenges Canada (http://www.grandchallenges.ca)grant of CAD $1 million (US $1.04 million) to address parasitic disease through African biodiversity.

The Grand Challenges Canada grants are “dedicated to improving the health and well-being of people in developing countries by integrating scientific, technological, business and social innovation.”

It’s predicted Africa’s growing population will reach between 1.5 and 2 billion inhabitants before 2050: a lot of people needing affordable remedies and treatments.

Innovators have spotted an opportunity to simultaneously improve public health while also boosting Africa’s income from discovering new drugs. Traditional knowledge can play a critical part in the evolving innovation and commercialisation of Africa’s medicines and treatments.

Turning to these remedies and botanicals needs careful stewardship: Africa has a terrible reputation for counterfeit medicines, which kill and harm many people every year. The medicines also need to be affordable and accessible.

In some Asian and African countries, 80 percent of people use traditional medicines for primary care at some point (WHO). There may be sceptics amongst those used to name-brand medicines but traditional African medicines have a rich cultural heritage and have sustained Africans over the centuries. It is estimated the continent has over 50,000 plants to draw from, with fewer than 10 percent so far investigated to tap their potential medical utility.

From the start, most of the new funding for the McGill project will be spent in Africa. Out of the CAD $1 million dollar grant, more than half the funds will go directly to partners at the University of Cape Town and the University of Botswana. At first, the funds will be used to screen local biodiversity for promising leads. These will then be subjected to chemical testing in the lab to extract their potential utility for treatments.

“This system allows selection of natural product compounds that act on multiple target sites in the parasite,” according to Ubalijoro, “thus reducing the chances of developing resistance to the kinds of novel drugs that we hope to develop based on promising leads derived from this effort.”

The approach being taken by the project hopes to reduce the time it takes to get drugs to market and to shift the power and initiative to local solutions and scientists, rather than waiting for outsiders to come to the rescue.

The project hopes to contribute to not only improving people’s health but to stimulating local economies. This will be done by growing local pharmaceutical industries, retaining local talent which often now leaves the continent and doing rewarding and dynamic science within Africa. In short: making being in Africa attractive.

It is hoped the success of the project will breed more success, as has happened in other places – think Silicon Valley in California, or Bangalore in India.

“Success in this project will diminish the risk for technology-based investments related to health innovation,” said Ubalijoro, “helping to encourage local venture capital to help grow African science entrepreneurs. The overall benefit is improved livelihoods and prosperity locally as well as reduced spread of disease threats locally and internationally as we travel globally. ”

By bringing the science closer to those who need the help, it is hoped the painfully slow process of new drug development will take on a greater urgency.

“Discovery to production of a marketable drug can be a lengthy process,” said Ubalijoro. “But as novel methodologies are used to decrease candidate drug failure through the development and clinical processes, we can decrease the time it takes to bring drugs to market while empowering local innovation systems to lead the process instead of waiting for others to do so.

“The sense of urgency felt by local scientists to solve local problems can stimulate innovation and safe delivery of new medicines for African populations.”

Ubalijoro wants to see greater cooperation across disciplines and for people to come together in “innovation clusters,” that bring together policy, business and technical capability.

“I would like to see local investment in innovation coming from the public, private and NGO sectors,” explained Ubalijoro. “I would also like to see women scientists taking an active role in leadership and in becoming the next generation of innovating African scientists.”

Ubalijoro says that for those with money to invest, this is a vast opportunity waiting to be tapped. And she would like to see a dedicated African Innovation Fund set up for this purpose

“The message for venture capitalists and investors is simple: by cultivating local talent, we can help African scientists and entrepreneurs explore indigenous-based solutions to local health problems while taking advantage of the most advanced technologies available globally to ensure that quality, risk mitigation and profits can grow hand in hand with healing the ailments of African populations.”

Published: May 2011

Resources

1) RISE-AFNNET: African Natural Products Network: RISE-AFNNET works to develop Africa’s rich biodiversity into a natural products industry of social and economic significance. Building on an already active research network of 10 member countries called NAPRECA, RISE-AFNNET expands existing research programs and formalizes educational activities in such natural products (NP) fields as engineering, biochemistry, environmental science, pharmacology, economic development and nutrition. Students work on natural product research projects in the context of poverty alleviation, gender equity, and Millennium Development Goals. Website:http://sites.ias.edu/sig/rise/rise-afnnet

2) GIBEX: The Global Institute for Bioexploration is a global research and development network that promotes ethical, natural product-based pharmacological bio exploration to benefit human health and the environment in developing countries. GIBEX was established by Rutgers, the State University of New Jersey, and the University of Illinois at Urbana-Champaign. Both are leading US universities with strong records of building successful international programs in discovering and developing life-saving medicines. Website: http://www.gibex.org/index.php

3) Screens-to-Nature Training: Scientists Learn New Way of Screening Plants for Pharmaceutical Applications. Website:http://www.gibex.org/article.php?id=132

Development Challenges, South-South Solutions was launched as an e-newsletter in 2006 by UNDP’s South-South Cooperation Unit (now the United Nations Office for South-South Cooperation) based in New York, USA. It led on profiling the rise of the global South as an economic powerhouse and was one of the first regular publications to champion the global South’s innovators, entrepreneurs, and pioneers. It tracked the key trends that are now so profoundly reshaping how development is seen and done. This includes the rapid take-up of mobile phones and information technology in the global South (as profiled in the first issue of magazine Southern Innovator), the move to becoming a majority urban world, a growing global innovator culture, and the plethora of solutions being developed in the global South to tackle its problems and improve living conditions and boost human development. The success of the e-newsletter led to the launch of the magazine Southern Innovator. 

Creative Commons License

This work is licensed under a
Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 License.

ORCID iD: https://orcid.org/0000-0001-5311-1052.

© David South Consulting 2023

Categories
Archive Development Challenges, South-South Solutions Newsletters

African Breakthroughs To Make Life Better

By David South, Development Challenges, South-South Solutions

SOUTH-SOUTH CASE STUDY

In the last 50 years, the domestication of high technology – bringing cheaper access to everything from personal computers to digital cameras and applications like global positioning systems (GPS) – has transformed millions of lives and the way business is done. In the next 50 years, biotechnology is set to do the same.

One aspect of biotechnology, genetic engineering (GE), has been lambasted by protest groups for being “unnatural” and driven by profit and the privatisation of nature. It has been seen as the domain of the big and powerful and remote from everyday needs. But now Africa is pioneering new approaches that are rooted in the real challenges faced by African people – and proving world-class scientific research can take place in Africa.

One initiative in South Africa aims to help small and medium sized farmers save their maize (corn) crops. The Food and Agriculture Foundation estimates that 854 million people in the world do not have sufficient food for an active and healthy life, and food security is a serious issue in Africa.

Maize streak viruses (MSV) are geminiviruses that destroy maize crops, and are a big problem throughout sub-Saharan Africa and the Indian Ocean islands. It leaves characteristic yellow-white streaks across the plant’s leaves, and produces deformed corn cobs, often severely dwarfed. Over half of the food supply for people in sub-Saharan Africa comes from maize, but MSV can wipe out an entire farmer’s crop.

Scientists at the University of Cape Town (www.uct.ac.za), South Africa, and the South African seed company PANNAR Pty Ltd have developed a resistant variety of maize that they hope will alleviate food shortages as well as promote the reputation of genetically engineered (GE) foods in Africa.

The MSV-resistant maize is the first GE crop developed and tested solely by Africans. Field trials will soon begin to make sure there are no unintended consequences on the environment and animal life dependent on maize.

Maize arrived in Africa in the 1500s from Mexico, and quickly displaced native food crops like sorghum and millet. Maize streak virus is an endemic pathogen of native African grasses, and is passed on to maize plants by leaf hopping insects.

The technology being developed can also be applied to other geminiviruses, like Wheat dwarf virus (WDV), sugarcane streak virus, barley, oats and millet. The scientists hope this development will prove the safety of GE foods, and address the criticism it is only a profit-driven technology by selling the seeds for minimal profit to subsistence farmers.

“If the GE maize turns out to be as hardy in the field as in the greenhouse,” said Dr Dionne Shepherd, who leads the research, “it could have a great impact on small and medium sized farmers. These are the farmers who need it the most, since they can’t afford preventative measures such as insecticides to control the leafhopper which transmits the disease. When small scale farmers lose 100 per cent of their crop (which they often do) due to maize streak disease, they not only lose any income they would have obtained selling their excess maize, but they also lose a massive chunk of their annual food supply.”

Other African institutions are working on GE crops with international partners, but, Shepherd, says, “The reason the MSV-resistant maize could improve the reputation of GE in Africa, is that international biotech partners, especially in the private sector, are generally not interested in solving problems that are unique to Africa, and Africans are therefore suspicious of their motives when they try to sell or even give away GE food.”

“MSV is endemic to sub-Saharan Africa, and our MSV-resistant maize was developed by Africans for Africa with no ulterior motives, which will hopefully make Africans accept the technology.”

“I think it should attract more funding, because once international funders see that world-class research can happen in Africa, they may be more willing to commit funds.”

In another development, African science is tackling the scourge of malaria on the continent. Caused by a parasite carried by mosquitoes, it kills more than a million people a year and makes 300 million more seriously ill (World Health Organisation). Ninety per cent of the deaths are in Africa south of the Sahara, and most are children.

While bed nets, insecticides and anti-malarial drugs are effective, the disease has become resistant to some drugs and work on a vaccine is slow.

Research in Kenya has found an effective way to both provide food and destroy mosquito larvae. The Nile tilapia – a highly nutritious fish – has long been known to feed on mosquito larvae. But nobody has made the connection between this fact and the fight against malaria. Francois Omlin, a researcher at the International Centre of Insect Physiology and Ecology in Nairobi, Kenya (www.icipe.org), has conducted the first field tests to prove this approach.

“The tilapia species was never tested in the field for its ability to eat mosquito larvae,” he told Reuters.

Ten days after introducing the tilapia to a pond, they had destroyed most of the larvae and after 41 weeks the number of mosquitoes fell by 94 per cent, according to Omlin.

This means two important goals can be served by harvesting tilapia fish: greater access for Africans to the nutritious fish, and a dramatic reduction in mosquito-borne malaria.

Published: September 2007

Resources

Development Challenges, South-South Solutions was launched as an e-newsletter in 2006 by UNDP’s South-South Cooperation Unit (now the United Nations Office for South-South Cooperation) based in New York, USA. It led on profiling the rise of the global South as an economic powerhouse and was one of the first regular publications to champion the global South’s innovators, entrepreneurs, and pioneers. It tracked the key trends that are now so profoundly reshaping how development is seen and done. This includes the rapid take-up of mobile phones and information technology in the global South (as profiled in the first issue of magazine Southern Innovator), the move to becoming a majority urban world, a growing global innovator culture, and the plethora of solutions being developed in the global South to tackle its problems and improve living conditions and boost human development. The success of the e-newsletter led to the launch of the magazine Southern Innovator. 

Creative Commons License

This work is licensed under a
Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 License.

ORCID iD: https://orcid.org/0000-0001-5311-1052.

© David South Consulting 2023

Categories
Archive Development Challenges, South-South Solutions Newsletters

3D Printing Gives Boy a New Arm in Sudan

By David South, Development Challenges, South-South Solutions

SOUTH-SOUTH CASE STUDY

3D printing is rapidly going mainstream and is now starting to make a big impact in health care. One innovative solution is using the technology to manufacture artificial arms for amputees harmed by war in Africa.

While large-scale manufacturers use the machines to fabricate products and parts, from aircraft components to furniture, it is the smaller-scale use of 3D printing machines that has been getting many working in development excited.

3D printing (http://en.wikipedia.org/wiki/3D_printing) usually involves a desktop-sized fabrication machine that builds a three-dimensional object following instructions from a digital computer file. It is an additive process, in which material is laid down in successive layers to create an object. The technology has been around since the 1980s but only became affordable for the general public in the past five years. Typically, 3D printers are used to make prototypes — for example architectural models or machine parts — or to manufacture one-off objects without the need to turn to mass production methods. But the technology is evolving quickly and, according to The Guardian, “20% of the output of 3D printers is now final products rather than prototypes.”

For international development, 3D printing offers the potential to close the gap between what is available in developed and developing countries. Just as the Internet has closed the knowledge gap, and enabled people around the world to access news and knowledge at the same time, so 3D printing could make it possible for technological innovations to be available everywhere. Just upload the digital plans for an object, and people can download them and print the item, wherever they are.

Some of the more enthusiastic proponents of 3D manufacturing see it as a game-changer in access to technology. They argue it could eliminate material want and place the power of manufacturing in the hands of billions, in the same way the rapid proliferation of mobile phones and the Internet transformed access to information. That is the dreamers’ dream, but it is closer than many think.

The conflict in the new nation of South Sudan, which separated from the Republic of the Sudan in 2011, continues and involves UN peacekeeping forces (http://unmiss.unmissions.org). The violence has killed over 10,000 (International Crisis Group) and injured many more, ruining lives through lost limbs and capabilities. One young boy, Daniel Omar, 16, lost both his hands while trying to use a tree trunk to shield himself from an exploding bomb. Losing his hands was devastating enough, but he was also so depressed at not being of full use to his family that he wished he had died that day.

He is not alone in being harmed by the conflict. In total, an estimated 50,000 people in South Sudan are physically disabled, according to the International Committee of the Red Cross (ICRC).
Prosthetic limbs are very expensive and so far are not a priority for medical services in the country. Saving lives is the priority, with rehabilitation an expensive luxury.

This is where Not Impossible Labs (notimpossiblelabs.com), based in Los Angeles, California, came in. The non-profit startup founded by Mick Ebeling specializes in “crowd-sourcing to crowd-solve previously insurmountable healthcare issues.” The solutions are then made public on the Internet and explained in online media to help innovators either replicate the solutions or be inspired to come up with their own ideas.

The lab’s ingenious solutions include BrainWriter – a way to draw using brainwaves and a computer mouse that can allow disabled artists to carry on creating. Not Impossible Labs also developed a high-tech cane for the blind that draws on sonar technology and a laser to navigate the terrain and foresee upcoming obstacles.

Emotionally touched after learning about Daniel’s plight, Ebeling decided to act.
“I’ve got three little boys,” Ebeling told The Guardian newspaper. “It was hard for me to read a story about a young boy who had lost his arms.”

Project Daniel (http://www.notimpossiblelabs.com/#!project-daniel/c1imu) set out to manufacture artificial hands for Daniel without him having to leave his country and his family. Daniel was living between the Yida refugee camp in South Sudan and his home in the Nuba Mountains.

A team from Not Impossible Labs set up the 3D printing lab in the Nuba Mountains and trained and supervised the local team to print two prosthetic arms. The design for the arm was done in the U.S. at its headquarters in Venice, California and is available for free and is open source (http://en.wikipedia.org/wiki/Open_source). A “dream team of innovators” were assembled – including the South African inventor of the Robohand (http://www.robohand.net/), an Australian MIT (Massachusetts Institute of Technology) neuroscientist and a 3D printing company owner from Northern California – to crowd-solve the challenge of making a 3D-printable prostheses. A precision engineering company, Precipart (precipart.com/home), and Intel were also drafted in to support the project.

Not Impossible believe the spirit behind the project will be globally transformative.

“We are on the precipice of a can do maker community that is reaching critical mass,” said Elliot V. Kotek, Not Impossible’s content chief and co-founder. “There is no shortage of knowledge, and we are linking the brightest technical minds and creative problem-solvers around the globe. Project Daniel is just the tip of the proverbial iceberg.”

Daniel’s new artificial arm and hand took a 3D printer several days to make and cost around US $100.

In November 2013, Ebeling travelled to South Sudan with all the equipment required to “print” Daniel a new arm: 3D printers, spools of plastic and cables.

The plastic arm printed by the 3D printer works by allowing the wearer to flex what remains of their arm to pull various cables that act as ligaments, like in a real limb. When the user flexes and bends, the cables pull back and in turn make the fingers close and open.

It is not a solution for every amputee. “With the technology we currently have it’s hard to help people with no arm left,” said Kotek. “There needs to be at least a little bit of a stump.”

Shy at first, once Daniel saw the arm, he was transformed. “It was a pretty amazing thing to see this boy come out of his shell,” said Ebeling. “Getting Daniel to feed himself was a highlight that was right up there with watching my kids being born.”

Even more impressive has been the quick adoption of the technology by the local doctor, Dr. Tom Catena, who performs all the amputations in the area.

With two 3D printing machines left behind by Ebeling, Dr. Catena has been able to print a prosthetic arm a week.

The machines mostly work at night when it is cool. The printer parts are then assembled by eight local people trained to operate the machines and build the arms.

But how do they ensure, over time, this 21st-century technology doesn’t just fall into disrepair and neglect as has been seen time and again with other attempts at technology transfer? Weekly phone calls are made to check on the project and the plastic used to make the arms is sent directly from Not Impossible Labs.

And then there is community buy-in.

“At first these kids wanted arms that matched their skin tone, because they didn’t want to stand out,” said Kotek.

But in time the youths have been decorating the arms in many colors and customizing them. And the arms have been given a name: the Daniel Arm.

Published: May 2014

Resources

1) The pioneer behind developing 3D technology has been the Massachusetts Institute of Technology’s Fab Labs based in the United States. It has been running experimental “Fab Labs” across the global South for the past few years, experimenting with ways to apply this technology to the challenges of development and to use this technology to turn people on to the power of technology to solve problems. These experiments have explored how a 3D printer could print everything a small community could require but would otherwise be expensive or difficult to purchase through normal markets. Fab Lab is the educational outreach component of MIT’s Center for Bits and Atoms (CBA), an extension of its research into digital fabrication and computation. Website: http://fab.cba.mit.edu/

2) 3D Systems: 3D Systems envisions a future in which 3D printing will return humanity to a heritage of personalized, localized craftsmanship and improve quality of life. A new industrial revolution changing the human experience from health care to entertainment. Website: 3dsystems.com

3) MakerBot: MakerBot makes a range of 3D printers for consumers. Website: makerbot.com

4) Stratasys: Stratasys manufactures 3D printing equipment and materials that create physical objects directly from digital data. Its systems range from affordable desktop 3D printers to large, advanced 3D production systems, making 3D printing more accessible than ever. Website: http://www.stratasys.com/

5)  3D Printing and Technology Fund: The Fund seeks long term capital appreciation through focused investment in global 3D printing and technology companies. Website: http://www.3dpfund.com/

6) Digital Revolution: An Immersive Exhibition of Art, Design, Film, Music and Video Games: Running from July to September 2014 at the Barbican Centre in London, UK. Website: https://www.barbican.org.uk/bie/upcoming-digital-revolution

https://davidsouthconsulting.org/2021/03/02/new-3d-technology-makes-innovation-breakthrough-and-puts-mind-over-matter/

https://davidsouthconsulting.org/2022/09/26/3d-home-printing-landmark-10-houses-in-a-day/

Creative Commons License

This work is licensed under a
Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 License.

ORCID iD: https://orcid.org/0000-0001-5311-1052.

© David South Consulting 2023

Categories
Archive data Development Challenges, South-South Solutions Newsletters digital ID

African Health Data Revolution

By David South, Development Challenges, South-South Solutions

SOUTH-SOUTH CASE STUDY

A pioneering tool for gathering health data now being used in Kenya could herald a revolution in the way diseases are tracked and defeated around the world. It uses mobile phones to better connect patients with medical and health personnel, and allows data to be gathered in real-time and used to track health and improve the delivery of services, especially to remote and under-serviced areas.

In the past couple of years, Kenya has become a hotbed of mobile phone and information technology innovation. The now-famous Ushahidi crisis-mapping platform (www.ushahidi.com) is just one example. Social enterprise Data Dyne (www.datadyne.org) – with offices in Washington DC and Nairobi, Kenya – is offering its EpiSurveyor application (www.episurveyor.org) free to all to aid health data collection. It bills itself as “the first cloud-computing application for international development and global health … Think of it as like Gmail, but for data collection!”

EpiSurveyor claims to have more than 2,600 users around the world and is currently being upgraded to a second version.

“With the touch of a button I can see what’s going on across the country in real time,” Kenyan civil servant Yusuf Ibrahim told Britain’s Daily Telegraph newspaper. “It is amazing.”

Ibrahim works in Nairobi as the Kenyan Ministry of Health liaison to Data Dyne.

He uses maps and charts on mobile phones to track deadly disease outbreaks and vulnerable pregnancies.

The EpiSurveyor application works simply: A user logs into the website and builds and creates the sort of form they want. They then download it to a phone and start collecting data straight away.

Ibrahim gathers this data from mobile phones used by health care workers across the country.

“It used to take days, weeks or even a couple of months to find out about an outbreak of polio on the other side of the country,” he said. “Now we know almost instantly. The speed with which we can now collect information has catapulted healthcare and prevention to another level. It has completely changed healthcare and saved countless lives.”

He proudly points out Kenya’s mobile phone data collection system is “probably better than what they’ve got in the West.”

“Although we are a third world country, I’m pretty sure we’ve done this before

Western countries. While they are still collecting information in hard copy on clipboards, we are getting it instantly.”

Packed with data processing power, mobile phones are capable of an immense range of tasks and applications. Some see phones as key to a revolution in how healthcare is provided: the mobile phone becomes one-part clinic, another part mobile hospital dispensing advice and transmitting vital information back to healthcare professionals and scientists in hospitals and labs.

Despite dramatic improvements to the quality of hospitals in Africa and the number of qualified doctors, the continent’s healthcare services are still a patchwork, with rural and slum dwellers poorly served and the stresses of treating patients with contagious diseases like HIV/AIDS and malaria pushing resources to the limit.

The United Nations has a number of initiatives partnering with mobile phone manufacturers, networks and software developers as part of a global campaign to reduce HIV/AIDS, malaria and deaths in childbirth.

EpiSurveyor is being used by more than 15 countries’ ministries of health and is the adopted standard for the World Health Organization (www.who.int) (WHO) for electronic health data collection.

It began as a partnership with the United Nations Foundation, The Vodafone Group Foundation, WHO and the ministries of health of Kenya and Zambia in 2006 to pilot test the software for EpiSurveyor.

At the United Nations Foundation (www.unfoundation.org), chief executive Kathy Calvin equates the impact of mobile phones on global healthcare to the discovery of the antibiotic penicillin.

“Instead of building clinics and roads to remote towns and villages so that people can access healthcare, we are bringing healthcare directly to the people via mobile phones. You get a lot more healthcare for your money,” Calvin told the Telegraph.

Published: November 2010

https://davidsouthconsulting.org/2022/10/06/african-technology-tackles-health-needs/

https://davidsouthconsulting.org/2020/12/04/big-data-can-transform-the-global-souths-growing-cities/

https://davidsouthconsulting.org/2021/01/18/cheap-paper-microscope-to-boost-fight-against-diseases/

https://davidsouthconsulting.org/2020/12/04/data-surge-across-global-south-promises-to-re-shape-the-internet/

https://davidsouthconsulting.org/2022/10/18/indians-fighting-inflation-with-technology/

https://davidsouthconsulting.org/2022/10/12/lagos-traffic-crunch-gets-a-new-solution/

https://davidsouthconsulting.org/2022/10/31/mapping-beirut-brings-city-to-light/

https://davidsouthconsulting.org/2022/10/17/mapping-to-protect-kenyas-environment-the-emazingira-solution/

https://davidsouthconsulting.org/2022/03/08/mobile-phone-microscopes-to-revolutionize-health-diagnostics/

Development Challenges, South-South Solutions was launched as an e-newsletter in 2006 by UNDP’s South-South Cooperation Unit (now the United Nations Office for South-South Cooperation) based in New York, USA. It led on profiling the rise of the global South as an economic powerhouse and was one of the first regular publications to champion the global South’s innovators, entrepreneurs, and pioneers. It tracked the key trends that are now so profoundly reshaping how development is seen and done. This includes the rapid take-up of mobile phones and information technology in the global South (as profiled in the first issue of magazine Southern Innovator), the move to becoming a majority urban world, a growing global innovator culture, and the plethora of solutions being developed in the global South to tackle its problems and improve living conditions and boost human development. The success of the e-newsletter led to the launch of the magazine Southern Innovator.  

https://davidsouthconsulting.org/2021/03/05/southern-innovator-issue-1/

Follow @SouthSouth1

Slideshare: http://www.slideshare.net/DavidSouth1/development-challengessouthsouthsolutionsnovember2010issue

Southern Innovator Issue 1: https://books.google.co.uk/books?id=Q1O54YSE2BgC&dq=southern+innovator&source=gbs_navlinks_s

Southern Innovator Issue 2: https://books.google.co.uk/books?id=Ty0N969dcssC&dq=southern+innovator&source=gbs_navlinks_s

Southern Innovator Issue 3: https://books.google.co.uk/books?id=AQNt4YmhZagC&dq=southern+innovator&source=gbs_navlinks_s

Southern Innovator Issue 4: https://books.google.co.uk/books?id=9T_n2tA7l4EC&dq=southern+innovator&source=gbs_navlinks_s

Southern Innovator Issue 5: https://books.google.co.uk/books?id=6ILdAgAAQBAJ&dq=southern+innovator&source=gbs_navlinks_s

Creative Commons License
This work is licensed under a
Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 License.

ORCID iD: https://orcid.org/0000-0001-5311-1052.

© David South Consulting 2022